| 1. |
Dry the damaged board and hole sector. |
2.
|
Using 80 to 120 sanding paper sand around the hole. |
3.
|
Fill the hole with dense putty (Epoxy and Micro Balloons) |
| 4. |
Once cured, sand with 80 to 120 sanding paper. |
| 5. |
Laminate 2 slightly different size glass or carbon fabric patches (fabric weight around 160gr) with Epoxy. |
| 6. |
Once cured, apply some putty (Epoxy + micro balloons) over the glass or carbon patches. |
| 7. |
Once cured, sand surface carefully with 100 to 120 sanding paper. |
| 8. |
Fill pin holes with polyester filler (like Bondo).
|
| 9. |
Sand wet with 400 wet sanding paper.
|
| 10. |
Spray primer (facultative).
|
| 11. |
Sand wet with 400 to 800 wet sanding paper.
|
| 12. |
Paint. (Grey pantone number: 877 C / Gold pantone 871 C / White matt)
|
